Glue for stucco mouldings - Find the right glue for your project
For optimal adhesion when installing stucco moldings, it is essential to use the right glue. The choice of the right assembly glue for stucco moldings depends on the type of stucco mouldings and the conditions at the installation site. On this page we give you an overview of which glue is suitable for which specific requirements.
Adhesive for NMC mouldings
NMC offers four different molding adhesives that are tailored to various applications and needs. These include adhesives for bathrooms, wet rooms and outdoor areas, adhesives for butt joints, assembly adhesives for facade elements and a black filler adhesive for the NMC Black moldings.
ADEFIX
Stucco molding adhesive, filler and grouting material for NMC products made of polystyrene and polyurethane. Only suitable for indoor use and can be used on solid, dry, dust- and grease-free surfaces.
ADEFIX PLUS
Adhesive for butt joints and for bonding skirting boards in damp and heavily used rooms, flexible strips, strips that are only bonded on one side, cover skirting boards and for wall panels. Adhesive for indoor use only. Particularly for the butt joints of larger profiles from 10 cm in height.
DOMOSTYL HYBRID
System adhesive, filler and grouting material for Domostyl facade elements for outdoor use.
ADEFIX BLACK
Black filler adhesive for interior use. It is perfect for NMC's Black moldings. Adefix Black is characterized by its solvent-free formulation and offers excellent adhesion to various surfaces. The adhesive is sandable, paintable and offers a short correction time of around 5-10 minutes before it dries completely.
Adhesive for NMC mouldings
NMC offers four different molding adhesives that are tailored to various applications and needs. These include adhesives for bathrooms, wet rooms and outdoor areas, adhesives for butt joints, assembly adhesives for facade elements and a black filler adhesive for the NMC Black moldings.
ADEFIX
Stucco molding adhesive, filler and grouting material for NMC products made of polystyrene and polyurethane. Only suitable for indoor use and can be used on solid, dry, dust- and grease-free surfaces.
ADEFIX PLUS
Adhesive for butt joints and for bonding skirting boards in damp and heavily used rooms, flexible strips, strips that are only bonded on one side, cover skirting boards and for wall panels. Adhesive for indoor use only. Particularly for the butt joints of larger profiles from 10 cm in height.
DOMOSTYL HYBRID
System adhesive, filler and grouting material for Domostyl facade elements for outdoor use.
ADEFIX BLACK
Black filler adhesive for interior use. It is perfect for NMC's Black moldings. Adefix Black is characterized by its solvent-free formulation and offers excellent adhesion to various surfaces. The adhesive is sandable, paintable and offers a short correction time of around 5-10 minutes before it dries completely.
The 4 moulding adhesives from Orac Decor
Orac Decor offers four highly specialised molding adhesives that have been developed for different applications and requirements. These include special adhesives for damp rooms and outdoor areas, ready-to-use joint fillers, ultra-strong assembly adhesives for extra-large molding profiles and white adhesives for joining moldings.
FDP500 DecoFix Pro
Strong assembly adhesive for porous, dry and absorbent surfaces in the interior. Extra strong fastening adhesive that enables a long-lasting connection between profiles and walls and ceilings.
FDP700 DecoFix Power
Ultra strong assembly adhesive for a strong and long-lasting hold, especially for large profiles on smooth surfaces such as tiles and glass. Suitable as an adhesive for outdoor use and, thanks to its moisture resistance, also as a stucco moulding adhesive for damp rooms such as bathrooms.
FX400 DecoFix Ultra
White polymer-based joint adhesive for connections between profiles. Suitable adhesive for indoor and outdoor use.
FL300 Decofiller
Ready-to-use joint filler for shrink-free finishing of joints between decorative profiles after installation. Only for indoor use and not suitable for damp rooms. Can also be used to fill the joints or gaps between the profile and the surface on which it was installed. Damage to the wall or profile can be repaired with the filler.
The 4 moulding adhesives from Orac Decor
Orac Decor offers four highly specialised molding adhesives that have been developed for different applications and requirements. These include special adhesives for damp rooms and outdoor areas, ready-to-use joint fillers, ultra-strong assembly adhesives for extra-large molding profiles and white adhesives for joining moldings.
FDP500 DecoFix Pro
Strong assembly adhesive for porous, dry and absorbent surfaces in the interior. Extra strong fastening adhesive that enables a long-lasting connection between profiles and walls and ceilings.
FDP700 DecoFix Power
Ultra strong assembly adhesive for a strong and long-lasting hold, especially for large profiles on smooth surfaces such as tiles and glass. Suitable as an adhesive for outdoor use and, thanks to its moisture resistance, also as a stucco moulding adhesive for damp rooms such as bathrooms.
FX400 DecoFix Ultra
White polymer-based joint adhesive for connections between profiles. Suitable adhesive for indoor and outdoor use.
FL300 Decofiller
Ready-to-use joint filler for shrink-free finishing of joints between decorative profiles after installation. Only for indoor use and not suitable for damp rooms. Can also be used to fill the joints or gaps between the profile and the surface on which it was installed. Damage to the wall or profile can be repaired with the filler.
Adhesives for damp rooms and outdoors
For the installation of stucco moldings in damp rooms, such as bathrooms, or outdoors, special stucco moulding adhesives for outdoors and stucco moulding adhesives for bathrooms are required, which offer optimal adhesion even under difficult conditions. Here we recommend:
Adefix Plus - NMC
Domostyl Hybrid - NMC
Weather-resistant stucco moulding adhesive for outdoor use, for the assembly, grouting and filling of outdoor stucco mouldings.
FDP700 - Orac Decor
Assembly adhesive for outdoor use and stucco molding adhesive for the bathroom. Suitable for use in damp rooms on non-porous substrates. Excellent resistance to moisture and more extreme weather conditions.
Adhesives for damp rooms and outdoors
For the installation of stucco moldings in damp rooms, such as bathrooms, or outdoors, special stucco moulding adhesives for outdoors and stucco moulding adhesives for bathrooms are required, which offer optimal adhesion even under difficult conditions. Here we recommend:
Adefix Plus - NMC
Domostyl Hybrid - NMC
Weather-resistant stucco moulding adhesive for outdoor use, for the assembly, grouting and filling of outdoor stucco mouldings.
FDP700 - Orac Decor
Assembly adhesive for outdoor use and stucco molding adhesive for the bathroom. Suitable for use in damp rooms on non-porous substrates. Excellent resistance to moisture and more extreme weather conditions.
Tips for preparing and applying stucco moulding adhesive
When installing stucco mouldings, the correct preparation and application of the assembly adhesive is crucial. Thoroughly cleaning the surfaces, applying the adhesive evenly and observing the curing time are essential steps to achieve optimal adhesion and a perfect result. By following these steps, you can ensure that your stucco moldings adhere securely and permanently.
Preparing the surfaces
The surfaces must first be thoroughly cleaned of dust, grease and other contaminants. A clean and dry surface is crucial for adhesion.
Even application
Apply the molding adhesive evenly to the back of the moldings. Make sure the adhesive is well distributed to avoid air pockets and to ensure complete and even adhesion.
Pay attention to the curing time
The adhesive needs sufficient time to cure before the strips can be further processed or loaded. Pay attention to the manufacturer's instructions on the drying time to achieve the best possible result.
Tips for preparing and applying stucco moulding adhesive
When installing stucco mouldings, the correct preparation and application of the assembly adhesive is crucial. Thoroughly cleaning the surfaces, applying the adhesive evenly and observing the curing time are essential steps to achieve optimal adhesion and a perfect result. By following these steps, you can ensure that your stucco moldings adhere securely and permanently.
Preparing the surfaces
The surfaces must first be thoroughly cleaned of dust, grease and other contaminants. A clean and dry surface is crucial for adhesion.
Even application
Apply the molding adhesive evenly to the back of the moldings. Make sure the adhesive is well distributed to avoid air pockets and to ensure complete and even adhesion.
Pay attention to the curing time
The adhesive needs sufficient time to cure before the strips can be further processed or loaded. Pay attention to the manufacturer's instructions on the drying time to achieve the best possible result.
Glue consumption
To help you determine how much glue you need for your molding project, we have put together a detailed data sheet with precise information from the manufacturers to help you make the best use of the adhesives for your molding projects.
Glue consumption
To help you determine how much glue you need for your molding project, we have put together a detailed data sheet with precise information from the manufacturers to help you make the best use of the adhesives for your molding projects.
Conclusion - Why the right adhesive is so important
Using the right stucco moulding adhesive not only prevents the stucco moldings from coming off, but also contributes to the longevity and stability of your decoration. An incorrectly chosen adhesive can lead to unsightly cracks or the moldings coming off completely, which causes additional effort and costs.
