Tune-Light-LED von Brillux für wohnliche Beleuchtung an der Decke in einer modernen Küche.

Indirekte Beleuchtung mit Tune-Light-LED für stilvolles Ambiente in einer modernen Küche.

Brillux Tune Light LED – A exclusive interior design with lighting mouldings

Whether direct or indirect lighting - with the Tune Light LED system from Brillux you can set a great eye catcher in your rooms. Brillux offers you the complete package with all necessary materials and tools!

Decorative profile glue TuneLight TL-KL-3041 Brillux Accessories

Profile Adhesive Glue 3041, no solvents, great adhesive power, suitable for sanding and modeling, coatable, 310 ml

€11.35

Decorative profile glue TuneLight TL-KL-3341 Brillux Accessories

Stucco moulding seam adhesive glue 3341, for a durable adherence of TL stucco mouldings made of polyurethane, strong adhesive properties, dries transparently, 310 ml

€18.85

Stylish Indirect Lighting for Every Room

Indirect lighting is an elegant way to illuminate a room in a special manner. Depending on the size and design of the space, it can even serve as the main light source. It is also ideal for highlighting specific areas in a stylish and subtle way.

TuneLight LED System for Complete Solutions

The TuneLight LED system offers a complete package for indirect lighting in your home. It can be integrated easily into suitable light profiles. Decorative profiles that are open towards the wall or ceiling are particularly suitable to ensure optimal light distribution in the desired direction.

Installation of LED Technology

First, an aluminum profile is glued into the trim to prevent light from shining through the material. The aluminum profile also simplifies the installation of the LED strips. The LED flex boards are then inserted into the aluminum profile and covered with a plastic cover to create uniform illumination. The LED flex boards can be shortened every 5 cm, allowing them to be cut precisely to the required length.

Convenient Control and Adjustment

The lighting system is controlled via a radio remote control, with up to four controls operable simultaneously. The remote allows dimming and adjustment of the light color from cool white to warm white according to the desired atmosphere. It is recommended to connect the system to a switchable socket so that it can be turned on and off using a light switch, while fine adjustments are made via remote control. Installation of the electrical components should be carried out by a qualified electrician.

Technical Guidelines and Performance

Installation should begin at a corner to avoid routing through corners. All corners should be designed as uniformly as possible to ensure even light distribution. The operating temperature range is from minus 10 degrees to a maximum of 40 degrees. The maximum run length of one LED flex board is 5 meters. For longer distances, the 200 W system controller with two outputs should be used. This allows two separate 5 meter sections to be connected, achieving continuous lighting of up to 10 meters from a single power source.

Optimal Placement and Profile Selection

When installing the profiles, a sufficient distance from the ceiling should be maintained to ensure that the indirect lighting effect is fully visible. In our online shop you will find a wide selection of suitable profiles in exclusive designs. We are happy to provide individual advice to help you find the perfect solution.